YAMAHA PX10

รหัสสินค้า : YAMAHA PX10

YAMAHA PX10 เพาเวอร์แอมป์ เครื่องขยายเสียง 2x 1000W at 8Ω, 2x 1200W at 4Ω, Class-D amplifier, PEQ, crossover, filters, delay, and limiter functions, 2U

เพาเวอร์แอมป์ เครื่องขยายเสียง 2 x 1200 วัตต์ ที่ 4Ω เพาเวอร์แอมป์ขับเบส YAMAHA PX10 Poweramp 2 x 1000W at 8Ω, 2x 1200W at 4Ω, Class-D amplifier, PEQ, crossover, filters, delay, and limiter functions, 2U

   The Yamaha PX10 Stereo Power Amplifier delivers 1000W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company’s PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise.

   The on-board DSP functions include a PEQ, a delay, a crossover, and a limiter. They allow for detailed configuration of parameters such as input & output routing, input sensitivity, amp gain, and speaker impedance. The D-Control multi-band dynamic processor delivers a clear and consistent sound at any output level by shaping the frequency response of each speaker for either front-of-house or monitor configurations.

The Configuration Wizard helps save time during setup by assigning optimized speaker settings that match your system configuration. It can be used in basic mode for quick setup or advanced mode for more precise control over DSP parameters. You can store up to eight presets, which can be saved to a USB drive for use with other amplifiers and setups.

For secure operation, the panel-locking function ensures that your settings remain safe. With its sturdy frame and carrying handle, the PX10 is built to withstand extended road use.

Features:

• Class-D amplifier engine with single custom LSI chip and PLL technology
• Configuration Wizard allows for configuration of the system by assigning optimized speaker settings which can be saved as presets
• Digital routing of inputs & output (dual, parallel, single & SUM)
• DSP functions include PEQ, crossover, filters, delay & limiter, accessed via an LCD display
• D-Contour multi-band dynamic processing shapes the frequency response of speakers for specific applications
• Basic mode for quick setup and Advanced mode for more precise control
• Flexible connectivity with XLR & 1/4″ TRS inputs and binding post, SpeakON & 1/4″ TS outputs
• Presets can be saved to USB drive for use with other amplifiers and setups, Panel-locking function to keep settings safe
• Two 16-step variable-speed fans, Lightweight chassis

Specifications

Output Power

1000 W per channel at 8 Ohms

1200 W per channel at 4 Ohms

700 W per channel at 2 Ohms

Amplifier Type

Class-D, balanced output circuit (BLT)

THD + N

0.1% at 1 kHz, 10 W

0.3% at 1 kHz, half power

Frequency Response

20 Hz to 20 kHz, ±1.0 dB (1 W at 8 Ohms)

Crosstalk

≤ -60 dB

S/N Ratio

101 dB

Voltage Gain / Sensitivity

At 8 Ohms, Maximum Volume:

32.0 dB / +9.3 dBu (Gain Setting: 32 dB)

26.0 dB / +15.3 dBu (Gain Setting: 26 dB)

37.3 dB / +4 dBu (Gain Setting: 4 dB)

27.3 dB / +14 dBu (Gain Setting: 14 dB)

Cooling

2 x 16-step variable-speed fan (front-to-rear flow)

Maximum Input Voltage +24 dBu

Input Impedance

20 kOhms (Balanced)

10 kOhms (Unbalanced)

Sampling Frequency

48 kHz

Converters

A/D: 24-bit linear, 128 times over-sampling

D/A: 24-bit linear, 128 times over-sampling

Signal Processing

Input summing

D-contour: FOH / MAIN

Monitor

OFF

Delay: 0 to 74 ms

HPF / LPF: cutoff frequency 20 Hz to 20 kHz with polarity control

Speaker Processor: 6-band PEQ / limiter / delay

Latency

1.5 ms (analog input to speaker)

User Presets

8 user presets

Factory Presets

Speaker presets for Yamaha passive speakers

Connectors

Analog Input

2 x XLR-3-31

2 x 1/4 TRSSpeakers

2 x Neutrik SpeakOn NL4

2 x pairs of binding posts

2 x 1/4″ TS1 x AC inlet with AC cord clamp1 x USB 2.0 Type-A (female)

Power Requirements

120 VAC / 60 Hz

Power Consumption

310 W at 4 Ohms, 1/8 maximum power

60 W at 4 Ohms, Idle

Operating Temperature

32 to 104°F / 0 to +40°C

Storage Temperature

-4 to 140°F / -20 to +60°C

Dimensions (W × H × D)

18.90 x 3.46 x 15.25″ / 480 x 88 x 387.4 mm

Weight

16.31 lb / 7.4 kg