TOA DA-X1000S-AS

รหัสสินค้า : TOA DAX1000SAS

TOA DA-X1000S-AS เครื่องขยายเสียง 1X1,000 วัตต์

ดาวน์โหลด

   This is a Class D amplifier used for VX-1000 system which is compliant with the Chinese Standard CCCF for fire alarm system, connected by a dedicated interface. This has AUX INPUT which is for general purpose connection. DA-X1000F single-channel amplifier is a part of VX-1000 Basic system and these models will be used with VX-1000MC. Basic concept is smooth connection and interface with VX-1000MC. PA-LINK connection with RJ45 connector is used.

คุณสมบัติ

• Low-loss Class D power amplifier
• 1 channel 1000W
• can be used as standby amplifier

สเปค

Power Source

AC220V-240V, 50Hz/60Hz

Amplification System

Class D amplifier

Power Consumption

30W(standby mode), 1200W(Rated output 100V line, 10Ω)

Input

1 channel: PA LINK (Dedicated Interface with VX-1000MC)

1 channel: AUX INPUT=0dB(1V) (Input level control in maximum position), 20kΩ, electronically-balanced

Rated Output

1 channel: 1,000W (100V line, 10Ω)

Frequency Response

110 to16 kHz ±3dB

Total Harmonic Distortion

0.4% (1W), 1% (Rated output)

Protection Circuit

Overcurrent protection, under-voltage protection, overvoltage protection, overheat protection, short circuit protection

Signal to Noise Ratio

>90dB (A-weighted)

Control Input

ACTIVE: Short=AUX INPUT signal source goes Amplifier output/ Open= PA LINK signal source goes Amplifier output

LED Indicator

POWER (Green) x 1, SIGNAL (Green) x 1, PEAK (Red) x 1, AUX ACTIVE (Orange) x 1, FAULT (Red) x 1

Cooling

Forced air cooling by FAN

Operating Temperature

0°C to +40°C

Operating Humidity

90% RH or less (no condensation)

Finish

Front panel AL Black, Cover SECC Black

Control

Front: Power switch

Rear : Input volume

Dimensions

483(W)×88(H)×392(D)mm

Weight

6.18 kg

Included Accessories

CN)AC power cord x1, (EN)AC power cord x1, pluggable terminal block 2P x1, pluggable terminal block 5P x1