LAB GRUPPEN FAD602

รหัสสินค้า : FAD602

LAB GRUPPEN FAD602 เครื่องขยายเสียง 2x60 วัตต์ มี Dante Networking

ดาวน์โหลด

2 x 60W Commercial Amplifier with Direct Drive Technology, Dante Networking and Energy Star Certification

คุณสมบัติ

• 2 x 60 Watt amplifier for commercial and industrial applications
• Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
• Direct drive, constant power technology for superior audio performance and reliability
• Dante* audio connectivity to enable creating large audio systems over a local network
• Energy Star* certified design conserves energy and drastically reduces operational cost
• GPI remote volume control using standard RJ-45 connector and Ethernet cable
• Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
• Tamperproof gain controls for each channel on rear panel location
• Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
• Euroblock type amplifier output connectors
• Convection-cooled, fan-less amplifier technology for low noise
• Comprehensive fail safe circuit protection ensures continued operation

FAD602

   2 x 60 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

Dante* Audio Connectivity

   Dante replaces point-to-point analog and digital connections with a standard IP network that delivers completely lossless audio, massive channel counts and near infinite signal routing flexibility, all while being incredibly easy to deploy and use.

   Dante Domain Manager is network management software that enables user authentication, role-based security and audit capabilities for Dante networks, while allowing seamless expansion of Dante systems over any network infrastructure.

The FAD602 is DDM ready.

Energy Star* Certified

   Not only does FAD602’s direct drive constant power technology provide superior audio performance and reliability, it also consumes less mains power than competing models, which has earned it Energy Star* certification.

   This amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

สเปค

Maximum Output Power

4 or 8 Ω per channel60 W

Number of Ouput Channels

Number2

Minimun Load Impedance

4 Ω mode4 Ω

8 Ω mode8 Ω

70 V output mode82 Ω

100 V output mode166 Ω

Controls

FrontN/A

RearGain control, load config (4 Ω / 8 Ω / 70 V / 100 V), high-pass filter switch, reset button)

Indicators

Front PowerOn (blue), standby (yellow)

Limit (red LED), per channel-0.5 dBFS (digital)

Signal (green LED), per channel> -63 dBFS (digital)

Fault (red LED)Overheat, DC fault, over current etc

Rear DanteIndentify (yellow), clock sync (white)

System

Input transmission typeDante, 2 channels Rx

Input connectivity1 x RJ45 Ethernet connector, 1-port 100 Mbps to Dante interface

Input sensitivty-2 dBFS (digital)

Maximum input level0 dBFS (digital)

Outputs connectivity1 x 4-pin 5.08 mm Euroblock connector

Output circuit typeClass D

Remote connector2 x RJ45 Ethernet connector

Performance

Distortion,1/8 rated power<0.1%

Frequency response20 Hz to 20 kHz, +0/-1.5 dB

Crosstalk>72 dB

Signal-to-noise>101 dBA

High-pass filter80 Hz HPF

Circuit Protection

CoolingConvection-cooled, fanless

Amplifier protectionThermal protection, over current protection, DC protection, high frequency protection

Load protectionControlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)

Main voltage100-240 V~, 50/60 Hz with active power factor correction

Power consumption 1/8th rated power @ 4 Ω50 W

Mains connectorStandard IEC connector

Dimensions / Weight

Dimensions (H x W x D) 44 x 218 x 280 mm (1.7 x 8.6 x 11")

Weight 2.6 kg (5.7 lbs)

Finish Brushed black anodized aluminum chassis with black painted steel bottom

Approvals CE, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0