LAB GRUPPEN FA602

รหัสสินค้า : FA602

LAB GRUPPEN FA602 เครื่องขยายเสียง 2 x 60 วัตต์

ดาวน์โหลด

   เครื่องขยายเสียง LAB GRUPPEN FA602 เป็นแอมป์ที่ออกแบบมาสำหรับงาน Installation มีกำลังขับ 2×60 วัตต์ with Direct Drive Constant Power Technology, Low-Z (4/8 Ohm) and High-Z (70/100 V) per output with switchable high-pass filter, มีขนาดครึ่งแร็ค 1U

   LAB GRUPPEN FA602 2 x 60 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense.

   Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel.

คุณสมบัติ

• 2 x 60 Watt amplifier for commercial and industrial applications
• Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
• Energy Star* certified design conserves energy and drastically reduces operational cost
• Direct drive, constant power technology for superior audio performance and reliability
• GPI remote volume control using standard RJ-45 connector and Ethernet cable
• Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
• Tamperproof gain controls for each channel on rear panel location
• Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
• Euroblock type amplifier input and output connectors
• Convection-cooled, fan-less amplifier technology for low noise
• Comprehensive fail safe circuit protection ensures continued operation

สเปค

Maximum Output Power

4 or 8 Ω per channel60 W

Number of Ouput Channels

Number2

Minimun Load Impedance

4 Ω mode4 Ω

8 Ω mode8 Ω

70 V output mode82 Ω

100 V output mode166 Ω

Controls

FrontN/A

RearGain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter

Indicators

PowerOn (blue), standby (yellow)

Limit (red LED), per channelInput clip, output limit

Signal (green LED), per channel>1.23 mV (-56 dBu)

Fault (red LED)Overheat, DC fault, over current etc

System

Inputs2 x 3-pin 5.08 mm Euroblock connector

Input impedanceBalanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)

Maximum input level9.75 V (+22 dBu)

Outputs1 x 4-pin 5.08 mm Euroblock connector

Output circuit typeClass D

Remote connector2 x RJ45 Ethernet connector

Performance

Distortion, 1/8 rated power<0.5%

Frequency response20 Hz to 20 kHz, +0.5 / -1 dB

Crosstalk>65 dB

Signal-to-noise>100 dBA

High-pass filter80 Hz HPF

Circuit Protection

CoolingConvection-cooled, fanless

Amplifier protectionThermal protection, over current protection, DC protection, high frequency protection

Load protectionControlled start and shutdown behaviour, DC-fault protection

Power Supply, Voltage

Main voltage100-240 V~, 50/60 Hz with active power factor correction

Power consumption 1/8th rated power @ 4 Ω50 W

Mains connectorStandard IEC connector

Dimensions / Weight

Dimensions (H x W x D)44 x 218 x 280 mm (1.7 x 8.6 x 11.0")

Weight 2.6 kg (5.7 lbs)

Finish Brushed black anodized aluminum chassis with black painted steel bottom

Approvals CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0