Behringer NX4-6000

รหัสสินค้า : Behringer NX4-6000

Behringer NX4-6000 เครื่องขยายเสียง 4x1,600 วัตต์

  เครื่องขยายเสียง,เพาเวอร์แอมป์แบบ 4 ชาแนล Behringer NX4-6000 เป็นเพาเวอร์แอมป์แบบ Class-D Technology มีกำลังขับ 4 x 860 วัตต์ into 4 Ohms , 4 x 440 วัตต์ into 8 Ohms, Built-In Stereo Crossover, ตอบสนองความถี่ 20 Hz to 20 kHz, Balanced XLR-1/4″ Combo Inputs

 The Behringer NX4-6000 is a stereo power amplifier capable of delivering 440W of peak power per channel at 8 Ohms, or in bridge mode, up to 1600W of peak power into two 8-Ohm speakers. It employs SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply and zero-attack limiters to provide a linear 20 Hz to 20 kHz frequency response with noise-free audio and fast transient response at maximum output power into any speaker load impedance.

  The NX4-6000 features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A variable-speed fan and ventilation openings with back-to-front air flow further prevent overheating.

   Simple to operate, the NX4-6000’s front panel is equipped with detented and illuminated gain control knobs for precise level setting. The back panel houses four XLR-1/4″ combination input connectors compatible with balanced and unbalanced line-level sources. Twist-lock speaker connectors inhibit accidental speaker disconnection at the amp.

สเปค

• Delivers 4 x 1600 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms and weighs less than 13.4 lbs / 6.1 kg
• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Built-in stereo crossover with low-cut, high-cut and full range mode
• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
• “Zero-Attack” limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise level setting
• Precise 4-segment Signal and Limit LEDs to monitor performance
• XLR and 1/4” TRS combination input connectors for compatibility with any source
• Professional twist-lock speaker connectors for ultimate reliability
• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• “Back-to-front” ventilation system prevents thermal buildup for reliable operation
• Designed and engineered in Germany

NX4-6000

   The NX4-6000 power amplifier packs 6000 Watts (4 x 1600 Watts @ 2 Ohms; 2 x 3000 Watts @ 4 Ohms) into exceptionally lightweight (13.4 lbs / 6.1 kg) and rack-mountable packages. And because the NX4-6000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX4-6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

Class-D - Massive Power, Perfect Sound

   Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Sublimely Simple Operation

   The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX4-6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.

   The rear panel is also where you’ll find the switches that enable the NX4-6000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX4-6000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

SmartSense Impedance Compensation

   Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX4-6000’s design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.

Sound Value

   Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX4-6000 power amplifier is a serious amp for your most demanding applications.

   Experience the BEHRINGER NX4-6000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.

สเปค

Maximum Output Power4 x 1600 W into 2 Ohms per channel, stereo

4 x 860 W into 4 Ohms per channel, stereo

4 x 440 W into 8 Ohms per channel, stereo

2 x 3000 W into 4 Ohms, bridged

2 x 1600 W into 8 Ohms, bridged

Amplifier Class : Class-D

Input Sensitivity : 0.775 V (0 dBu), for rated power into 4 Ohms

Distortion : <0.2%

Frequency Response : 20 Hz to 20 kHz, +0 / -2 dB

Damping Factor : >145 at 8 Ohms

Signal to Noise : >100 dB

Input Connections :4 x XLR-1/4″ combo jacks

Input Impedance

10 kOhms, unbalanced

20 kOhms, balanced

Output Connectors : 4 x locking-style speaker connectors

Controls Front Panel

Channel A, B, C, and D gain knobs

Power switch

Controls Rear Panel

2 x mode switches (bridge, stereo, mono)

2 x crossover switches (LF, full range, HF)

Circuit breaker

Indicators

Power: Amber LED

Limit: 0 dB LED (per channel)

Signal: -40, -6, -3 dB LEDs (per channel)

Protect: Red LED (per channel)

Cooling

Continuously variable speed fan

Back-to-front air flow

Amplifier Protection

Thermal and DC protection

Stable into reactive or mismatched loads

Overload Protection : On/off muting, DC-fault power supply shutdown

Power Supply : 120 VAC, 60 Hz

Fuse : T 25 A H, 250 V

Power Consumption :620 W, at 2 Ohms, 1/8 rated power

Power Connector : Standard IEC receptacle

Dimensions (W x H x D) : 19.0 x 3.7 x 12.4″ / 48.3 x 9.4 x 31.6 cm (including 0.19″ / 5 mm rubber feet)

Weight : 13.4 lb / 6.1 kg