Audio-Technica AT2020USB+V

รหัสสินค้า : Audio-Technica AT2020USBV

Audio-Technica AT2020USB+ V (USB) ไมค์โครโฟนแบบ Cardioid Condenser USB Microphone (Limited Edition)

   Audio-Technica has taken the design of their AT series—microphones venerated in studios around the world—and built it into a USB mic that gets the job done with no fuss, allowing anyone to record a quality sound at home. Recording straight to computer, the mic allows you to forego the complications of an audio interface, a mixer, or even speakers: you can monitor your audio as you record over the mic's built-in 3.5mm headphone jack. A USB cable, a tripod tabletop stand, a mic mount, and a pouch are all included. This microphone comes with an AT8458a Shockmount.

Features

• For Streaming, VoIP, Music & More
• Works on Computers and Tablets
• 3.5mm Jack with Low-Latency Monitoring
• Cardioid Polar Pattern
• Headphone Volume Control
• Broadcast-Quality 48 kHz/16-Bit Capture
• Bus-Powered from Computer or Tablet
• Includes Stand & Mic Mount
• Includes USB Cable & Pouch
• Included AT8458a Shockmount

* ในชุดไม่รวมหูฟังและคอมพิวเตอร์

Designed for Multiple Uses

   This mic is designed for your voice, whether you use it to stream game-play over Twitch, participate in VoIP conference calls, or to sing over productions you've created in your laptop.

For Computers or Mobile Devices

   The mic will operate with both Mac and Windows computers as well as tablets, so long as you have the compatible adapter for mobile devices (available separately). No preamp, interface, converter, or mixer are necessary for recording your voice.

Cardioid Polar Pattern for the Untreated Room

   The microphone makes use of a directional cardioid polar pattern to minimize off-axis sound. This polar pattern naturally, yet effectively tamps down room tone and focuses the audio capture on what's directly in front of the mic, so everyone can clearly hear your voice.

Built-In 3.5mm Headphone Jack and Volume Dial

   The mic offers a headphone jack for monitoring. Just plug a pair of headphones into the AT2020USB's 3.5mm jack, and you'll be able to listen to your broadcast-quality audio in all its glory. A convenient volume dial helps you raise or lower the headphone volume, so you won't have to change the volume on your computer or your recording software to hear audio at your desired level. Finally, the mic gives you a blend knob, which comes in handy for recording music: you can use it to adjust the balance between your mic's pickup and any pre-recorded audio; adjust this knob to your liking, and you won't hear any latency as you record.

High-Quality Headphone Amp

   When you use the AT2020USB+, you'll have access to a high-quality headphone amp built right into the housing. The audio streaming from the mic into your headphones will be clear, strong, and free from any noise you don't want to hear.

Broadcast-Quality Audio Capture

   The mic records audio at sample rates and resolutions up to 16-bit / 48 kHz, giving you the broadcast standard for media playback. When it comes to the digital technology in this mic, you need not worry about recording a substandard sound.

USB Connection Right Out of the Box

   With an included tripod stand, mic mount, and USB cable, you can get up and running right away. Simply place the mic in the mount, attach the mount to the stand, and run the USB cable from your ATUSB2020+ into your computer. When you're done, stow the mic in the included pouch for safekeeping.

Specs

Microphone

Form Factor : Stand/Boom Mount

Sound Field : Mono

Capsule : Condenser

Polar Pattern: Cardioid

Orientation : Side Address

Circuitry: Solid-State

High-Pass Filter: Yes

Gain Adjustment: Yes

On-Board Controls: Headphone Volume

Performance

Frequency Range: 20 Hz to 20 kHz

Connectivity

Headphone Connector: 1 x 1/8" / 3.5 mm

Power

Bus Power: USB

Operating Voltage: 5 V

Physical

Color : Silver

Mounting: 5/8"-27 Female, Mic Clip

Tabletop (Included)

Dimensions: ø: 2.05 x L: 6.38" / ø: 52 x L: 162 mm

Weight: 13.6 oz / 385.56 g