Allen&Heath PA-12CP

รหัสสินค้า : AllenHeath PA12CP

Allen&Heath PA-12CP | เพาเวอร์มิกเซอร์ Portable 12-Channel Powered Mixer with 500 x 500 Watt Constant Power Amplifiers

The Allen & Heath PA-12CP is a portable 12-channel mixer with built in 500 x 500 Watt constant power amplifier. The locking-speakon speaker connections drive power to loud-speakers without any additional amplification; and with enough sufficient power for mid-size clubs, auditoriums, restaurants, small theaters, houses-of-worship, and more.

The PA-12CP features a total of twelve input channels, with channels 1 through 8 featuring mono 1/4" TRS line and balanced XLR microphone inputs. Channels 9/10 and 11/12 share stereo 1/4" phone and RCA phono inputs. Both 1/4" and RCA stereo inputs feature individual level controls and may be used simultaneously for a total of four stereo inputs. A built in effects processor provides high quality reverb, chorus and delay effects.

The PA-12CP is an excellent solution for small halls, bars, restaurants, karaoke events, theaters, classrooms, houses-of-worship and more.

500 x 500 Watt Amplifier

The PA-12CP feature built in 500 x 500 watt constant power amplifiers that are capable of efficiently driving 4 or 8 ohm loud speakers.

Stereo and Mono Inputs

The input channels feature 8 mono inputs with 1/4" phone and XLR connections. Channels 9/10 and 11/12 feature stereo paired 1/4" phone and RCA connections that are capable of being used simultaneously.

Digital Effects Processor

16 reverb, chorus and delay effects are provided and may be edited with external MIDI editing software.

Flexible Output Routing

Mix outputs include source selectable A/B amplifier outputs, mono sum with switchable sub bass filter, analog and S/PDIF digital recording outputs.

Flexible Output EQ

4-band semi-parametric EQ are featured for final frequency contour of output signal.

ALLEN&HEATH PA-12CP

Specifications

• Max output level +21dBu into >2k load
• Nominal output level 0dBu (0.775 Volts rms)
• Headroom +21dB
• Freq response +/-1dB 20Hz to 30kHz
• Distortion < 0.006% THD+N @1kHz +10dBu
• Crosstalk <-90dB Channel to channel @1kHz
• <-95dB Mute shutoff
• <-95dB Fader shutoff
• MIC EIN 22-22kHz -128dB 150 ohm source
• Residual noise < -88dBu
• Mix noise < -84dBu
• Meters Peak reading 12 LED
• -30 to +16dB
• Channel Peak 5dB before clipping
• Amplifiers
• Configuration Class AB bipolar assisted MOSFET
• Power output 500W + 500W rms music power into 4 ohms or 8 ohms
• Constant power Rear panel slide switch – Set for 4 or 8 ohms
• Distortion < 0.02% THD+N @1kHz
• Limiter Program dependent output sensing input clip limiter
• Protection short circuit, overload, DC, thermal cut out