YAMAHA EMX5

รหัสสินค้า : EMX5

YAMAHA EMX5 เพาเวอร์มิกเซอร์ 2 x 500 วัตต์ Portable Powered Mixers

Box-type robust and portable powered mixer featuring high efficiency power amplifier of 630W and mixer with comprehensive effects, 1-Knob Master EQ™ and built-in feedback suppressor.

• 2x 630W [4Ω], 2x 460W [8Ω] (1kHz THD+N less than 10% CEA2006)
• 2x 500W [4Ω], 2x 370W [8Ω] (1kHz THD+N less than 1% CEA2006)
• Powerful & High Efficiency Class-D Amplifier
• 12 Line Inputs (8 mono + 4 stereo)
• High-Z input (channel 4) to connect guitars or basses directly
• 1-Knob Master EQ™
• Onboard Feedback Suppressor
• Comprehensive, professional 24 different effects
• Metal chassis for extended operation and robustness
• Large handles for extreme portability and protection
• Universal power supply eliminates concern on power fluctuations
• Optional rack-mount kit available

Specs.

Outline

I/O

Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)

Phantom power +48 V

Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]

Control and others FOOT SWITCH : Effect Mute on/off

Bus Stereo: 1, AUX: 2 (Including FX)

Input Channel Function

PAD 30 dB (CH1-4)

Hi-Z Supported (CH4)

HPF 80 Hz, -12 dB/oct. (CH1–3)

COMP 1-knob COMP (CH1–4)

EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)

EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)

EQ LOW 100 Hz +15 dB / -15 dB (Shelving)

On-board processors DSP SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ

On-board amplifiers

Maximum output power @4ohms

1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W

Maximum output power @8ohms

1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W

Level Meter 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)

General specifications

Frequency response

Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz

Total harmonic distortion Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)

Hum & noise level

Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)

Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)

Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter)

Protection circuit Load protection DC-fault

Amplifier protection Over heat protection, Over current protection, Integral power protection

Power supply protection Over heat protection, Over current protection

Power requirements AC 100-240V, 50Hz/60Hz

Power consumption 42 W (Idle) / 210 W (1/8 Power)

Dimensions

W 465 mm (18 5/16")

H 308 mm (12 1/8")

D 325 mm (12 13/16")

Net weight 9.5 kg (20.9 lbs)

Accessories Owner’s Manual, Technical Specifications, AC power cord (2.5 m)

Options Foot switch: FC5, Rack-mount brackets: RK-EMX7

Others Operating Temperature : 0 to +40℃

(0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are at their maximum position if not specified.)