AKG C414XLS STEREO SET

รหัสสินค้า : AKG C414XLSSTEREOSET

AKG C414XLS STEREO SET | ไมโครโฟนบันทึกเสียง แบบแพ็คคู่ 2 ตัว เป็นไมค์แบบคอนเด็นเซอร์

 This is a matched pair of AKG C414 XLS Multi-Pattern Large-Diaphragm Condenser Microphones, a staple within the audio industry. Equipped with nine selectable polar patterns, three attenuation levels and three switchable bass-cut filters, the C414 XLS remains one of the most versatile condenser microphones for recording vocals, drums, and acoustic & amplified instruments in the studio or on stage.

   This microphone is designed to closely approximate the sonic character of the vintage C414 B-ULS. The 1″ edge-terminated dual-diaphragm transducer combined with the low-noise electronic circuitry provide a wide dynamic range of 134 dB and can handle SPL up to 158 dB, for a detailed and natural sound.

   Features include a peak-hold LED to alert you if overload peaks occur, and a Lock Mode so the microphone settings cannot be changed unintentionally. The elastic capsule suspension minimizes structurally transmitted noise from chassis vibration. The rugged all-metal body ensures efficient rejection of RF interference and makes this microphone well suited to withstand the rigors of studio and stage handling.

   Every factory-matched pair of C414 XLS is created from microphones selected by AKG’s computer-aided matching method and provides the highest possible correlation over the microphones’ entire frequency range, as well as virtually identical sensitivity for natural three-dimensional stereo recordings. Built and designed in Austria, the set comes with a metal carrying case, two spider-type shockmounts, two stand adapters, two foam windscreens, and a stereo bar.

Features:

• Dual-diaphragm 1” edge-terminated transducer
• Nine polar patterns: omnidirectional, cardioid, hypercardioid, figure-8, wide cardioid, and the intermediate patterns in between
• 134 dB dynamic range (up to 158 dB SPL)
• Lock Mode for live operation – all controls can be conveniently disabled
• Peak-hold LED displays overload peaks
• All-metal body rejects electrostatic and electromagnetic interference
• Three switchable bass-cut filters to reduce wind noise and proximity effect (40, 80, & 160 Hz)
• Three attenuation levels for close-up recording and high-output sources (-6,-12,-18 dB)
• Elastic capsule suspension minimizes structurally transmitted noise from chassis vibration
• Designed and manufactured in Austria

Specifications

Analog Performance

Polar Pattern : Cardioid, Figure-8, Hypercardioid, Omnidirectional, Wide-Angle Cardioid

Pattern Selection : Switched

Frequency Range : 20 Hz to 20 kHz

Signal to Noise Ratio : 88 dB A-Weighted

Equivalent Noise Level : 6 dB A-Weighted

Maximum SPL : 140 dB SPL

Pad : -6 dB

-12 dB

-18 dB

Impedance : 200 Ohms

Load Impedance : 2200 Ohms

Sensitivity : 23 mV/Pa

Low-Cut Filter : @ 40 Hz

@ 80 Hz

@ 160 Hz

General

Output Connectors : 1 x 3-Pin XLR

Operating Current Consumption : 4.5 mA

Operating Voltage : 44 to 52 V

48 V

Operating Temperature : 14 to 140°F / -10.00 to 60.00°C

Length : 6.30″ / 160 mm

Diameter : 1.97″ / 50 mm

Weight : 10.58 oz / 300 g